SENTRON Low Ash Products

SENTRON™ Low Ash

Premium oils with between 0.1% and 0.6% weight ash

Petro-Canada offers an extensive line of SENTRON Low Ash Products. SENTRON Natural Gas engine oils are premium performance, long-life engine oils for Stationary Gas engines and compressors in a wide variety of applications.

  • Extended oil life and excellent control of engine deposits
  • Exceptional overall engine protection for maximum reliability and savings
  • Advanced piston cleanliness
  • Verified and approved by many OEMs

Suitable for 4-stroke cycle gas engines requiring a Low Ash product with either traditional or non-traditional gas sources

SENTRON Low Ash Products

SENTRON LD 8000 (0.52% wt ash)

SENTRON LD 8000 provides revolutionary performance of up to 300%[2] longer drain intervals over the leading global conventional competitor. SENTRON LD 8000 contains a specialized additive mix that provides greater TBN retention to help neutralize acids that can attack liner surfaces. SENTRON LD 8000 helps prevent deposits from ash and worn metal parts – deposits that could otherwise result in higher oil consumption.

Applications

A premium Low Ash SAE 40 lubricant, suitable for use in 4–stroke engines operating on natural pipeline gas, pre-treated sewage/biogas and selective pre-treated process gases.

OEM Approvals

2G

  • Series: All 
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use 

Caterpillar

  • Series: G3300 - G3600
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use 

Caterpillar Power Systems

  • Series: CG 132, CG 170, CG 260
  • Fuel: Natural Gas 
  • Approval Class: Approved for Use / Listed  

GE Jenbacher

  • Series: 2 - 3    
  • Fuel Type: A
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 4 Version A + B 
  • Fuel Type: A
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 4 Version C
  • Fuel Type: A
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 6 Version C + E
  • Fuel Type: A
  • Approval Class: Approved for Use / Listed 

GE Waukesha

  • Series: All Co-Gen, 220GL
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

GE Waukesha

  • Series: Other - Newer Engines Only
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

MTU On-Site Energy

  • Series: 4000 Series (L61, L62, L63)
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

MTU On-Site Energy

  • Series: 4000 Series (L32, L33, L64)
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

MWM

  • Series: All
  • Fuel Type: Natural Gas
  • Approval Class: Limited Approval

Volkswagen

  • Series: ECOBLUE 2.0
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

SENTRON LD 5000 (0.60% wt ash)

SENTRON LD 5000 provides excellent performance for up to 200%[1] longer drain intervals and exceptional overall engine protection for maximum reliability and savings. SENTRON LD 5000 helps provide reduced valve recession and controls wear of piston rings, cylinder liners and bearings for prolonged engine life vs. competitive oils.

Applications

Petro-Canada recommends SENTRON LD 5000 for use in Caterpillar, GE (Jenbacher/Waukesha) and many turbocharged or naturally aspirated, stoichiometric or lean burn engines that require a Low Ash natural gas engine oil.

OEM Approvals

AgriKomp

  • Fuel: Natural Gas 
  • Approval Class: Approved for Use 

Avesco AG

  • Series: GM/TG/TBG/TBG K lean burn engines and G/TBG 2K with catalyst; GM/TG/TBG/TBG K lean burn engines; 
    NOT for G / TBG 2 K engines with catalyst
  • Fuel: Natural Gas (EG)
  • Approval Class: Approved for Use 

Caterpillar

  • Series: G3300 - G3600
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use 

Caterpillar Power Systems

  • Series: All
  • Fuel: Natural Gas 
  • Approval Class: Approved for Use / Listed  

Deutz

  • Series: All 
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use  

GE Jenbacher

  • Series: 2 - 3    
  • Fuel Type: A, CAT
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 4 Version A + B 
  • Fuel Type: A
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 4 Version C
  • Fuel Type: A, B, C, CAT
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 6 Version C + E
  • Fuel Type: A, CAT
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 6 Version F
  • Fuel Type: A, B, C, CAT
  • Approval Class: Approved for Use / Listed 

GE Waukesha

  • Series: All Co-Gen, 220GL
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

GE Waukesha

  • Series: Other - Newer Engines Only
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

Guascor

  • Series: FGLD, SFGLD
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed 

MAN Engines

  • Series: Natural Gas
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

MTU On-Site Energy

  • Series: 400 Series
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

MTU On-Site Energy

  • Series: 4000 Series (L61, L62, L63)
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

MWM

  • Series: Sulfate ash content up to 0.5 wt.%
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use

MWM

  • Series: All
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

Perkins

  • Series: 4000 Series
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

Rolls Royce

  • Series: K-G1 / -2 / -3
  • Fuel Type: Natural Gas, Biogas
  • Approval Class: Suitable for Use

Rolls Royce

  • Series: Lean Gas Burn, Bergen BV-G
  • Fuel Type: Biogas
  • Approval Class: Suitable for Use

Rolls Royce

  • Series: Lean Gas Burn, Bergen CR-G
  • Fuel Type: Natural Gas
  • Approval Class: Suitable for Use

Wärtsilä

  • Series: 34SG E 50SG
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

SENTRON LD 3000 (0.47% wt ash)

SENTRON LD 3000 helps provide a high level of performance in high output turbocharged engines that prefer a Low Ash oil. It provides excellent control of engine deposits, even when there is a need for added high temperature deposit control.

Applications

Recommended for most 4-stroke and some 2-stroke gas engines. It is suitable for use in engines fitted with catalytic converters. It is also suitable for severe service applications including high output, turbocharged engines that encounter high exhaust gas temperatures. The result can be significantly less valve sticking for reduced backfiring in these severe applications.

OEM Approvals

Caterpillar

  • Series: G3300 - G3600
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use 

Caterpillar Power Systems

  • Series: All
  • Fuel: Natural Gas 
  • Approval Class: Approved for Use / Listed  

GE Waukesha

  • Series: Co-Gen 
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

GE Waukesha

  • Series: Other 
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

GE Waukesha

  • Series: Other - Newer Engines Only
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

MWM

  • Series: All
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use / Listed

Volga Diesel Mamins

  • Series: Gas Engines
  • Fuel Type: Natural Gas
  • Approval Class: Approved for Use

SENTRON CG 40 PLUS (0.52% wt ash)

SENTRON CG 40 PLUS provides excellent control of deposits and other issues caused by high halogen gas levels produced by landfills. Unlike conventional landfill / biogas / sewer gas engine oils, SENTRON CG 40 PLUS is specifically designed to address current and future engines running in this severe contaminated gas application where higher BMEP engines are used.

Applications

SENTRON CG 40 PLUS is a uniquely designed Low Ash formula for 4-stroke gas engines running in severe service landfill gas operations.

Caterpillar Power Systems

  • Series: All (20 Engine Maximum)
  • Fuel: Biogas, Landfill 
  • Approval Class: Limited Approval  

GE Jenbacher

  • Series: 2 - 3    
  • Fuel Type: B, C
  • Approval Class: Approved for Use / Listed

GE Jenbacher

  • Series: 4 Version A + B 
  • Fuel Type: B, C
  • Approval Class: Approved for Use / Listed 

GE Jenbacher

  • Series: 6 Version C + E
  • Fuel Type: B, C
  • Approval Class: Approved for Use / Listed 

MWM

  • Series: All (20 Engine Maximum)
  • Fuel Type: Biogas, Landfill
  • Approval Class: Limited Approval

SENTRON LD Synthetic BLEND (0.51% wt ash)

A 15W-40 multigrade extension of the SENTRON line, formulated as a Synthetic blend to extend drain intervals and give better low temperature performance in comparison to mono-grade SAE 40's.

Applications

SENTRON LD Synthetic BLEND has low temperature starting capabilities down to -20°C. Field trial results have shown outstanding piston cleanliness which may result in longer equipment life and less downtime.

SENTRON VTP 10W-40 (0.54% wt ash)

Specially formulated to meet the demands of stationary natural gas engines for exceptional cleanliness of the engine through all seasons.

Applications

Recommended for use in natural gas fuelled engines that require high zinc for improved valve train wear while providing excellent cold start capability. SENTRON VTP 10W-40 is suitable for use in applications where Cummins CES20074-2012 is specified.

OEM Approvals

Arrow

  • Series: Pump Jack  (Gasoline Engines Converted to Natural Gas)    
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use 

Ford

  • Series: 350, Other V8 (Gasoline Engines Converted to Natural Gas)      
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use  

GM

  • Series: 350, Other V8   
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

SENTRON VTP 0W-30 (0.58% wt ash)

A Low Ash, Synthetic blend gas engine oil formulated specifically as an all season solution for small to mid-sized engines that are difficult to start in severe winter conditions.

Applications

All the features of SENTRON VTP10W-40 formulated for use in cold climates. Ideal for extreme cold starts / cold flow pumpability (<-35°C/ <-31°F).

OEM Approvals

Arrow

  • Series: Pump Jack  (Gasoline Engines Converted to Natural Gas)    
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use 

Ford

  • Series: 350, Other V8 (Gasoline Engines Converted to Natural Gas)      
  • Fuel: Natural Gas 
  • Approval Class: Verified for Use  

GM

  • Series: 350, Other V8   
  • Fuel Type: Natural Gas
  • Approval Class: Verified for Use

SENTRON 590 (0.59% wt ash)

SENTRON 590 provides a high level of performance in high output turbocharged engines that prefer a Low Ash oil. It helps provide excellent control of engine deposits, and is specially formulated for engines that operate in severe nitrating conditions.

Applications

Recommended for selected 4-stroke gas engines. SENTRON 590 is suitable for use in engines fitted with catalytic converters.

Related Product Lines